Built-in full-band measurement antenna specification
    创始人2025-01-13

    The TDXL-BA900 is a full-band GNSS measurement built-in antenna that supports the reception of satellite navigation signals from BDS, GPS, GLONASS, and GALILEO systems. It meets the current demands for multi-system compatibility and high-precision measurement and can be widely applied in geodetic surveying, marine surveying, precision agriculture, deformation monitoring and other high-precision navigation and positioning scenarios.

    1、Using multi-feed miniaturized technique, the antenna enables the right circular polarization and phase center performance, as well as minimizes the impact of measuring error;

    2、The antenna unit offers high gain and minimal gain roll-off, providing excellent reception of low elevation satellite signals and ensuring normal reception in severely obscured locations.

    3、The reactance network suppression technology is adopted to effectively reduce the impact of multipath signals on measurement accuracy.


    Signal support

    BDS:B1I、B1C、B2a、B2b、B3I;    GPS:L1、 L2、L5; 

    GNONASS:G1、 G2;    Galileo:E1 、E2、E5a、E5b、E6  L-Band

    Operating frequency

    1164MHz~1300MHz;1520MHz-1615MHz

    Impedance matching

    50 Ω

    Dual-frequency delay difference

    ≤5ns

    Polarization

    RHCP

    Operating voltage

    3.0~12V DC

    Highest gain

    ≥5.5 dBi

    Operating current

    ≤35mA

    Axial ratio

    ≤3dB

    Operating temperature

    -40℃~+80℃

    Elevation coverage

    360°

    Storage temperature

    -45℃~+85℃

    Phase center error

    ±2mm

    Humidity

    95% non-condensing

    LNA gain

    38±2dB

    Dimension(mm)

    See the attached figure

    Noise figure

    ≤2.0dB

    Output interface

    MCX(Customizable in cable exit method and length)

    Output V.S.W.R.

    ≤2.0

    Weight

    ≤350g

    Flatness in band

    ±2dB


    Related models:TDXL-BA900 

    Dimension:
    image.png