Miniaturized external multi-satellite multi-frequency measurement antenna specification
    创始人2025-01-13

    The TDXL-BA720 is a multi-satellite, multi-frequency GNSS high-precision measurement external antenna that supports the reception of satellite navigation signals from BDS, GPS, GLONASS, and GALILEO systems. It meets the current demands for multi-system compatibility and high-precision measurement and can be widely applied in geodetic surveying, marine surveying, precision agriculture, deformation monitoring and other high-precision navigation and positioning scenarios.

    1、Using multi-feed miniaturized technique, the antenna enables the right circular polarization and phase center performance, as well as minimizes the impact of measuring error;

    2、The antenna unit offers high gain and minimal gain roll-off, providing excellent reception of low elevation satellite signals and ensuring normal reception in severely obscured locations.

    3、The front-end filtering circuit is designed to effectively reduce the interference of signal reception, ensuring measurement accuracy.


    Signal support

    BDSB1IB1CB2aB2bB3I   GPSL1L2

    GLONASSG1G2   GalileoE1 E5b

    Operating frequency

    1205MHz~1278MHz1559MHz-1615MHz

    Impedance matching

    50Ω

    Dual-frequency delay difference

    ≤5ns

    Polarization

    RHCP

    Operating voltage

    3.0~12V DC

    Highest gain

    ≥4.5dBi

    Operating current

    ≤40mA

    Axial ratio

    ≤3dB

    Operating temperature

    40~+80

    Elevation coverage

    360°

    Storage temperature

    45~+85

    Phase center error

    ≤2.0mm

    Humidity

    95% non-condensing

    LNA Gain

    34±2dB

    Dimension

    See the attached figure

    Noise figure

    ≤2.0dB

    Output interface

    TNC-K

    Output V.S.W.R.

    ≤2.0

    Weight

    ≤180g

    Flatness in band

    ±2dB

    Mounting type

    Centering rod

    Related models:TDXL-BA720

    Dimension:
    image.png